RCKT2006M0KH,0.250 Thick Round Pack of 10 GC3040 Grade 0.394 Corner Radius RCKT Style Sandvik Coromant COROMILL Carbide Milling Insert Multi-Layer Coating
Sandvik Coromant COROMILL Carbide Milling Insert, RCKT Style, Round, GC3040 Grade, Multi-Layer Coating, RCKT2006M0KH, 0.250' Thick, 0.394' Corner Radius (Pack of 10): Industrial & Scientific. Sandvik Coromant COROMILL Carbide Milling Insert, RCKT Style, Round, GC3040 Grade, Multi-Layer Coating, RCKT2006M0KH, 0.250" Thick, 0.394" Corner Radius (Pack of 10): Industrial & Scientific. Used with the Sandvik Coromant CoroMill 200 for medium- or heavy-machining rough face milling and profiling on nodular or high-tensile cast iron in difficult-to-average machining conditions . GC3040 is a medium temperature chemical vapor deposition (MTCVD) coating of titanium carbon nitride (TiCN) and aluminum oxide (Al2O3) over carbide that provides good shock resistance without limiting wear resistance and displays toughness and longevity at low to moderate cutting speeds . Choice of medium-machining (KM) or heavy-machining (KH) chipbreaker to help prevent chip buildup . Round shape is the strongest of all shapes . Screw-style mounting for secure clamping . Maximum cut depth: 0.394 inches . The RCKT GC300 carbide indexable milling insert has a round shape, is available with a KM or KH chipbreaker, and provides good shock resistance without limiting wear resistance in medium or heavy machining of nodular or high-tensile cast iron in average-to-difficult machining conditions at low to moderate cutting speeds with coolant. A combination of carbide and a thin multilayer coating of titanium carbon nitride (TiCN) and aluminum oxide (Al2O3) applied through medium temperature chemical vapor deposition (MTCVD) displays toughness and longevity. MTCVD coatings are deposited at lower temperatures than chemical vapor deposition (CVD) coatings, resulting in the appearance of few or no cracks in the coating and providing improved toughness and smoothness compared to CVD coatings. . This positive insert is used with the CoroMill 200, a screw-style insert holding system for rough face milling and profiling with high chip-removal rates. The insert is available with a choice of either a medium-machining KM chipbreaker or a heavy-machining KH chipbreaker. The round shape provides the strongest cutting edge of all shapes. Round inserts have a variable lead angle that allows for the production of thinner chips as the depth of cut is reduced, which improves productivity. The insert has a hole in the center, eight cutting edges, and a 7-degree clearance angle. . Milling inserts are coded according to their specific cutting and application capability (e.g., RCKT 12 0 M0-KM). Each section of the code represents details of the insert: shape, clearance angle, insert tolerances, combination of chipbreaker and clamp type, cutting edge length, insert thickness, M0 for metric inserts or 00 for U.S. version inserts, and chipbreaker style. Tolerance of the theoretical diameter of the insert ranges from + or - 0.002” to 0.00”. Insert thickness tolerance is + or - 0.001”. Insert shapes and sizes may have different inscribed circle (iC) measurements, which relate to ranges of cutting depths, speeds, lead angles, and feed rates. The iC is the largest circle that can be drawn within the edges of the insert shape. Generally, as the insert size and the iC become larger, the maximum cutting depth increases. Cutting depth influences the metal removal rate, the number of cuts, chip evacuation efficiency, and power required when using the insert. Indexable inserts are small cutting tools designed to remove material in external and internal cutting applications such as turning, milling, drilling, and grooving. They are held by an insert holder, have multiple cutting edges, and can be rotated when one edge wears down. Multiple inserts can accomplish a variety of cuts in one operation. An insert is either positive or negative, which refers to the rake or clearance angle at which the insert removes material.. produces tools for turning, milling, and drilling. Headquartered in Sweden and represented in 130 countries, the company manufactures tools used throughout the metalworking field, including the automotive and aerospace, die and mold, and general engineering industries.. Matching Inserts to Holders These inserts are used with the CoroMill 200, a screw-style insert holding system for rough face milling and profiling. When used with the RCKT insert, the CoroMill 200 has strong cutting edges and high chip-removal rates. It performs well in unstable environments and requires a rigid setup and secure workpiece clamping.. . . .